VIBRO METER IOC8T200-580-000-111 控制器卡件是用于 VM600 机架式机械监控系统的高质量、高可靠性接口卡。以下是该控制器卡件的一些关键特性：

多通道支持：IOC8T 卡支持8个温度或过程监控通道，每个通道都可以独立配置。

信号输入配置：每个监控通道具有电流源输出的可配置信号输入。

DC输出选项：每个监控通道的直流输出可以配置为基于电流的信号（4至20 mA）或基于电压的信号（0至10 V）。

继电器配置：具有4个可配置继电器，每个继电器有三个触点，以及报警复位（AR）和危险旁路（DB）控制输入。

简化工程和维护：通过集成的工程和维护环境，可以对现场总线设备的整个生命周期进行配置、调试、维护和诊断。

自动扫描功能：新的自动扫描功能可以减少启动时间并简化故障排除，通过扫描 PROFIBUS 网络并上传从属设备地址和配置信息。

远程连接和资产管理：ComDTM 允许通过资产管理软件进行远程以太网连接，显著降低维护成本。

SD卡插槽：具有SD卡插槽，用于在灾难情况下存储配置文件，或用于更新模块的固件，而不需要1769 CPU。

VIBRO METER IOC8T200-580-000-111 控制器卡件适用于石油、煤炭、金属矿、非金属矿和木材等工业领域，以及基本材料、动力和燃料的工业，金属冶炼及加工、炼焦及焦炭、化学、化工原料、水泥、人造板以及电力、石油和煤炭加工等行业

The VIBRO METER IOC8T200-580-000-111 controller card is a high-quality, highly reliable interface card for VM600 rack mounted mechanical monitoring systems. Here are some of the key features of the controller card:

Multi-channel support: The IOC8T card supports eight temperature or process monitoring channels, each of which can be configured independently.

Signal input configuration: Each monitoring channel has configurable signal inputs for current source output.

DC Output options: The DC output of each monitoring channel can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V).

Relay configuration: Features 4 configurable relays, each with three contacts, as well as alarm reset (AR) and hazard bypass (DB) control inputs.

Simplify engineering and maintenance: With an integrated engineering and maintenance environment, the entire life cycle of fieldbus devices can be configured, commissioned, maintained, and diagnosed.

Automatic Scan function: The new automatic scan function reduces startup time and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information.

Remote Connectivity and Asset Management: ComDTM allows remote Ethernet connectivity via asset management software, significantly reducing maintenance costs.

SD card slot: Has an SD card slot for storing configuration files in case of disaster, or for updating the firmware of a module without the need for a 1769 CPU.

VIBRO METER IOC8T200-580-000-111 Controller card is suitable for industrial applications such as petroleum, coal, metallic, non-metallic and wood, as well as for basic materials, power and fuels. Metal smelting and processing, coking and coke, chemical, chemical raw materials, cement, wood-based panels and power, oil and coal processing industries