Vibro-Meter VM600 IOC4T 200-560-000-111 是一种输入/输出卡件，用于与 VM600 系列 MPC4 机械保护卡配合使用。以下是该卡件的一些关键特性和功能：

信号接口：IOC4T 卡作为信号接口，连接至 MPC4 机械保护卡的所有螺丝端子板（48个端子）。

多通道支持：支持 4 个动态信号输入和 2 个转速表（速度）输入。

继电器包含：卡件包含 4 个继电器，这些继电器可以由软件控制，并且可归因于报警信号。

可编程输出：提供 32 个完全可编程的开路集电极输出，这些输出可以通过跳线选择连接至 IRC4 和 RLC16 继电器卡片。

缓冲和保护：提供缓冲的原始电压和电流振动输出，并且所有输入和输出都有 EMI 保护。

热插拔功能：卡件支持带电插入和取出（热插拔）。

安装方式：安装在 VM600 (ABE04x) 机架的后部，并通过两个连接器连接到机架背板。

通信协议：IOC4T 卡在从机模式下运行，并通过 P2 连接器使用工业包(IP)接口与 MPC4 通信。

前面板端子：前面板包含端子板连接器，用于连接来自传感器的传输电缆。

应用领域：适用于石油、煤炭、金属矿、非金属矿和木材等工业领域，以及基本材料、动力和燃料的工业，金属冶炼及加工、炼焦及焦炭、化学、化工原料、水泥、人造板以及电力、石油和煤炭加工等行业

The Vibro-Meter VM600 IOC4T 200-560-000-111 is an input/output card designed for use with the VM600 Series MPC4 mechanical protection card. Here are some of the key features and functions of the card:

Signal interface: The IOC4T card acts as a signal interface and is connected to all screw terminal boards (48 terminals) of the MPC4 mechanical protection card.

Multi-channel support: Four dynamic signal inputs and two tachometer (speed) inputs are supported.

Relay inclusion: The card contains 4 relays that can be controlled by software and attributed to alarm signals.

Programmable outputs: 32 fully programmable open collector outputs that can be connected to IRC4 and RLC16 relay cards via jumper selection.

Buffering and protection: The original voltage and current vibration outputs are buffered, and all inputs and outputs are protected by EMI.

Hot swap function: The card can be plugged in and removed (hot swap).

Installation method: It is installed at the rear of the VM600 (ABE04x) rack and connected to the chassis backplane through two connectors.

Communication protocol: The IOC4T card runs in slave mode and communicates with the MPC4 using the Industrial packet (IP) interface via the P2 connector.

Front panel terminals: The front panel contains terminal board connectors for connecting the transmission cable from the sensor.

Application fields: Suitable for oil, coal, metal ore, non-metal ore and wood and other industrial fields, as well as basic materials, power and fuel industries, metal smelting and processing, coking and coke, chemical, chemical raw materials, cement, wood-based panels and power, oil and coal processing industries