ABB压头传感器PFVL141V、PFVL141C和PFVL141R是ABB公司提供的压头传感器产品，它们在工业应用中发挥着重要的作用，特别是在需要精确测量力的场合。以下是对这三种压头传感器的详细介绍：

PFVL141V压头传感器

1. 主要特点与用途

PFVL141V是一种矩形压头传感器，可根据实际需求定制尺寸，长度通常为30mm的倍数，对于超过900mm的长度，则需为60mm的倍数。

宽度同样可选，且为30mm的倍数。

该传感器适用于0.63至56MN的轧制力测量，广泛应用于钢厂、电厂等需要高精度力测量的场合。

不锈钢边条为压头线圈和内部部件提供了良好的保护。

2. 技术参数

精度等级：±0.5%（% of Fnom）

线性偏差：≤±0.5%（% of Fnom）

磁滞率：≤0.2%（% of Fnom）

重复性误差：≤±0.1%（% of Fnom）

工作温度：-10°C至+90°C（最大允许临时温度+110°C，存储温度-40°C至+90°C）

3. 选型与订购

用户在订购时需要明确型号名称（PFVL141V）、额定载荷（如0.63MN、1.0MN等）、以及压头的宽度和长度。

PFVL141C压头传感器

1. 主要特点与用途

PFVL141C是圆形压头传感器，具体测量范围和标准尺寸可能因型号而异，但通常具有较高的测量精度和稳定性。

适用于电厂、钢厂等需要测量大范围力的工业环境。

2. 选型与订购

用户在订购时需要明确型号（如PFVL141C-XXMN，其中XX代表具体测量范围）、以及任何特定的尺寸要求。

PFVL141R压头传感器

1. 主要特点与用途

PFVL141R压头传感器（注意：这里的信息可能相对较为有限，因为“R”型号的具体参数和用途可能因产品更新而有所变化）通常也具备高精度和稳定的力测量能力。

适用于需要精确测量力的各种工业应用。

2. 选型与订购

用户在订购时需要明确型号（PFVL141R）、额定载荷、以及任何特定的尺寸或性能要求。

The ABB pressure head sensors PFVL141V, PFVL141C, and PFVL141R are pressure head sensor products provided by ABB, which play an important role in industrial applications, especially in situations where precise force measurement is required. The following is a detailed introduction to these three types of pressure head sensors:

PFVL141V Pressure Head Sensor

1. Main features and applications

PFVL141V is a rectangular pressure sensor that can be customized in size according to actual needs. The length is usually a multiple of 30mm, and for lengths exceeding 900mm, it needs to be a multiple of 60mm.

The width is also optional and is a multiple of 30mm.

This sensor is suitable for measuring rolling force ranging from 0.63 to 56MN and is widely used in applications such as steel mills and power plants that require high-precision force measurement.

The stainless steel edge strip provides good protection for the pressure head coil and internal components.

2. Technical parameters

Accuracy level: ± 0.5% (% of Fnom)

Linear deviation: ≤± 0.5% (% of Fnom)

Hysteresis rate: ≤ 0.2% (% of Fnom)

Repetitive error: ≤± 0.1% (% of Fnom)

Working temperature: -10 ° C to+90 ° C (maximum allowable temporary temperature+110 ° C, storage temperature -40 ° C to+90 ° C)

3. Selection and ordering

Users need to specify the model name (PFVL141V), rated load (such as 0.63MN, 1.0MN, etc.), as well as the width and length of the indenter when placing an order.

PFVL141C Pressure Head Sensor

1. Main features and applications

PFVL141C is a circular pressure sensor, and the specific measurement range and standard size may vary depending on the model, but it usually has high measurement accuracy and stability.

Suitable for industrial environments such as power plants and steel mills that require measurement of large-scale forces.

2. Selection and ordering

Users need to specify the model (such as PFVL141C-XXMN, where XX represents the specific measurement range) and any specific size requirements when placing an order.

PFVL141R Pressure Head Sensor

1. Main features and applications

The PFVL141R pressure head sensor (note: the information here may be relatively limited as the specific parameters and uses of the "R" model may vary due to product updates) typically also has high-precision and stable force measurement capabilities.

Suitable for various industrial applications that require precise measurement of force.

2. Selection and ordering

Users need to specify the model (PFVL141R), rated load, and any specific size or performance requirements when placing an order.