3500/15-05-05-02本特利电源模块是Bently Nevada（本特利内华达）开发的一种重要电源组件，以下是对该电源模块的详细解析：

一、基本概述

• 型号：3500/15-05-05-02
• 品牌：Bently Nevada（本特利内华达）
• 类型：交流/直流电源模块
• 功能：为3500系列机械保护系统提供稳定电源

二、技术规格

• 电源类型：

  • 上部槽口：通用交流电源（85至264伏交流RMS）
  • 下部槽口：通用交流电源（85至264伏交流RMS）
  • 备注：该模块支持交流和直流的任意组合，但在此特定型号中，两个槽口均配置为通用交流电源。

• 输入电压范围：

  • 交流电源：85至264伏交流RMS（对应峰值电压为120至373伏）
  • 频率范围：47至63Hz

• 输出特性：该电源模块能够将输入的广泛电压范围转换为3500系列模块所需的电压。

• 安装要求：必须安装在3500机架左侧的指定插槽中，且为半高模块。

• 冗余性：支持冗余双电源配置，当安装两个电源时，底部插槽中的一个用作主电源，而较高插槽中的一个用作备用电源。只要安装了第二个电源，移除或插入任一电源模块都不会影响机架的运行。

三、特点与优势

• 兼容性强：与世界各地的电压源兼容，适用于不同的电压环境。
• 稳定性高：采用行噪声滤波作为标准形式，确保电源输出的稳定性。
• 热插拔功能：在不破坏机架的情况下，可以通过移除或插入任一电源模块来实现“热插拔”，方便维护和更换。
• 保护机制完善：具有超限保护功能，当输入电压超出范围时，会损坏电源或电源输入模块（PIM）上的保险丝开路，以保护系统安全。

四、应用场景

3500/15-05-05-02本特利电源模块广泛应用于工业自动化和过程控制领域，特别是那些需要连续机械保护且对电源稳定性要求较高的场景。例如，它可以用于大型机械的振动监测和保护系统，确保设备的正常运行和延长使用寿命。

The 3500/15-05-05-02 Bentley power module is an important power component developed by Bently Nevada. The following is a detailed analysis of the power module:

1、 Basic Overview

Model: 3500/15-05-05-02

Brand: Bently Nevada

Type: AC/DC power module

Function: Provide stable power supply for 3500 series mechanical protection system

2、 Technical specifications

Power type:

Upper slot: Universal AC power supply (85 to 264 volts AC RMS)

Lower slot: Universal AC power supply (85 to 264 volts AC RMS)

Note: This module supports any combination of AC and DC, but in this specific model, both slots are configured as universal AC power supplies.

Input voltage range:

AC power supply: 85 to 264 volts AC RMS (corresponding to peak voltage of 120 to 373 volts)

Frequency range: 47 to 63Hz

Output characteristics: This power module is capable of converting a wide range of input voltages into the voltage required by 3500 series modules.

Installation requirements: It must be installed in the designated slot on the left side of the 3500 rack and be a half height module.

Redundancy: Supports redundant dual power configuration, where when two power supplies are installed, one of the bottom slots is used as the primary power supply and the other in the higher slot is used as the backup power supply. As long as a second power supply is installed, removing or inserting any power module will not affect the operation of the rack.

3、 Characteristics and advantages

Strong compatibility: Compatible with voltage sources around the world and suitable for different voltage environments.

High stability: Adopting row noise filtering as the standard form to ensure the stability of power output.

Hot swappable function: Without damaging the rack, it is possible to achieve "hot swappable" by removing or inserting any power module, which is convenient for maintenance and replacement.

Complete protection mechanism: It has over limit protection function. When the input voltage exceeds the range, it will damage the power supply or open the fuse on the power input module (PIM) to protect the system safety.

4、 Application scenarios

The 3500/15-05-05-02 Bentley power module is widely used in the fields of industrial automation and process control, especially in scenarios that require continuous mechanical protection and high power stability requirements. For example, it can be used for vibration monitoring and protection systems of large machinery, ensuring the normal operation of equipment and extending its service life.