GE美国IC695ETM001以太网通讯模块是一款高性能的通信模块，以下是对其的详细介绍：

主要功能与特点：

IC695ETM001是一款两（2）端口以太网发射器模块，可实现以太网连接，支持10/100 Mbps传输速率和自动协商功能。

该模块使PACSystem能够与90系列和VersaMax控制器等其他控制器平台通信。

通过四层TCP/IP（互联网）协议栈执行服务请求传输协议（SRTP）、Modbus TCP和以太网全局数据（EGD）协议。

支持通过以太网全局数据进行定期数据交换，执行EGD命令以读写控制器。

支持使用串行实时传输协议（SRTP）和SRTP通道的TCP/IP服务，能够充当MODBUS TCP服务器和MODBUS TCP客户端。

配备一个嵌入式开关，可配置为自动协商、感应、速度和交叉检测。

可用于在以太网TCP/IP上与SNTP时间服务器进行时间同步。

技术规格：

以太网处理器速度为200 MHz。

配有LED状态指示灯，包括以太网确定、局域网确定、日志清空、单个端口和速度LED状态指示灯。

支持RS-232串行端口，数据传输速率从1200 bps到115200 bps。

模块内置的站管理器功能可通过串口和以太网连接访问，并提供监控访问。

适用场景：

该模块适用于工控领域，可用于数据采集、通信传输等方面。

适用机型包括RX3i控制器。

安装与维护：

可使用兼容背板IC695CHS007、CHS012或CHS016进行安装。

与除CPE400之外的任何其他PACSystem RX3i模块兼容。

最好安装在无电源的RX3i背板上，但也支持在有电源或处理器处于运行模式时插入（热插拔功能）。

物理特性：

工作电压：24VDC

工作温度：-40℃到70℃

工作湿度：5%到95%

产品尺寸：125mm x 72mm x 138mm

产品重量：0.5kg

外壳材质：金属

其他信息：

安装时，需确认产品与机型匹配，按照产品使用说明进行安装和配置。

正常情况下，电容的使用寿命为5年

GE US IC695ETM001 Ethernet communication module is a high-performance communication module, the following is a detailed introduction:

Main functions and features:

The IC695ETM001 is a two (2) port Ethernet transmitter module that enables Ethernet connectivity and supports 10/100 Mbps transmission rates and auto-negotiation.

This module enables PACSystem to communicate with other controller platforms such as the 90 Series and VersaMax controllers.

Service Request Transfer Protocol (SRTP), Modbus TCP, and Ethernet Global Data (EGD) protocols are executed over the Layer 4 TCP/IP (Internet) protocol stack.

Supports periodic data exchange over Ethernet global data, and runs EGD commands to read and write controllers.

Support for TCP/IP services using Serial Real-time Transport Protocol (SRTP) and SRTP channels, capable of acting as both MODBUS TCP server and MODBUS TCP client.

Equipped with an embedded switch that can be configured for automatic negotiation, sensing, speed and cross detection.

Can be used to synchronize time with the SNTP time server over Ethernet TCP/IP.

Technical specifications:

Ethernet processor speed is 200 MHz.

Equipped with LED status indicators, including Ethernet determine, LAN determine, log clear, individual port and speed LED status indicators.

Support RS-232 serial port, data transfer rate from 1200 bps to 115200 bps.

The station manager function built into the module is accessible via serial and Ethernet connections and provides monitoring access.

Application scenario:

The module is suitable for industrial control field and can be used for data acquisition, communication transmission and so on.

Models include RX3i controllers.

Installation and maintenance:

The compatible backplane IC695CHS007, CHS012, or CHS016 can be used for installation.

Compatible with any other PACSystem RX3i module except the CPE400.

It is best installed on an unpowered RX3i backplane, but it also supports insertion when power is available or the processor is in running mode (hot swap function).

Physical characteristics:

Working voltage: 24VDC

Operating temperature: -40℃ to 70℃

Operating humidity: 5% to 95%

Product size: 125mm x 72mm x 138mm

Product weight: 0.5kg

Case material: metal

Additional information:

During installation, ensure that the product matches the model and follow the instructions for installing and configuring the product.

Under normal circumstances, the service life of the capacitor is 5 years