GE 美国Mark VIe IS420UCSBH1A REV.H UCSB控制器模块

1. 产品概述：
• 该控制器模块是由美国通用电气（GE）开发的Mark VIe系列中的一款UCSB控制器模块，型号为IS420UCSBH1A REV.H。
• UCSB控制器是独立的计算机，可执行特定应用的控制系统逻辑。它与传统控制器不同，不承载任何应用I/O。
2. 主要规格与特点：
• 处理器：使用600 MHz的Intel EP80579微处理器，提供高效的数据处理能力。
• 内存：配备256 MB DDR2 SDRAM，带有纠错码（ECC），确保数据完整性。
• 闪存：支持SRAM，NAND闪存大小为2千兆字节，用于存储控制程序和数据。
• 操作系统：采用QNX Neutrino实时操作系统，确保系统的可靠性和实时性。
• 特点：无风扇、无电池、单模块设计，面板占用空间小，方便安装和维护。
3. 接口与连接：
• 通过IONet接口与I/O组件进行通信，IONet是一种专用以太网，仅支持Mark控制I/O模块和控制器。
• 支持IEEE 1588协议，实现控制器和I/O组件的时钟同步，同步精度可达100微秒以内。
4. 应用领域：
• 该控制器模块广泛用于工业自动化、过程控制和监测应用，包括但不限于生产线控制、机器控制、流程控制、数据采集与监测、能源管理和环境监测等领域。
5. 安装与认证：
• UCSB控制器应安装在面板上，防止垂直气流通过散热片。
• 适用于危险和非危险位置，具有相应的认证，如UL E207685和ATEX 2区, IIC组等。
6. 其他信息：
• 控制器预装了特定应用软件，支持梯级或块运行，允许在线对控制软件进行微小更改，无需重启系统。
• 控制器模块的重量约为2.4磅，适合安装在各种工业环境中。

GE Mark VIe IS420UCSBH1A REV.H UCSB controller module

Product Overview:

The controller module is a UCSB controller module in the Mark VIe series developed by the United States General Electric (GE), model IS420UCSBH1A REV.H.

UCSB controllers are standalone computers that execute application-specific control system logic. Unlike traditional controllers, it does not carry any application I/O.

Main specifications and features:

Processor: The 600 MHz Intel EP80579 microprocessor provides efficient data processing capabilities.

Memory: 256 MB DDR2 SDRAM with error correction code (ECC) to ensure data integrity.

Flash memory: Support SRAM, NAND flash memory size of 2 gigabytes for storing control programs and data.

Operating system: QNX Neutrino real-time operating system is adopted to ensure the reliability and real-time performance of the system.

Features: No fan, no battery, single module design, small panel space, easy installation and maintenance.

Interfaces and connections:

I/O components are communicated via the IONet interface, a dedicated Ethernet that supports only Mark control I/O modules and controllers.

Support IEEE 1588 protocol, achieve clock synchronization of controller and I/O components, synchronization accuracy up to 100 microseconds.

Application field:

The controller module is widely used in industrial automation, process control and monitoring applications, including but not limited to line control, machine control, process control, data acquisition and monitoring, energy management and environmental monitoring.

Installation and Certification:

The UCSB controller should be mounted on the panel to prevent vertical air flow through the heat sink.

Suitable for hazardous and non-hazardous locations with corresponding certifications such as UL E207685 and ATEX 2 Zone, IIC Group, etc.

Additional information:

The controller comes pre-loaded with application-specific software and supports cascade or block operation, allowing minor changes to the control software to be made online without restarting the system.

The controller module weighs approximately 2.4 pounds and is suitable for installation in a variety of industrial environments.