霍尼韦尔900G32-0101是一款32点数字输入模块，以下是该模块的一些关键特性：

输入类型：DC电压类型（Digital Input Module - DC Voltage type）。

输入通道数：32个输入通道，分为两组，每组16个通道。

输入电压范围：10 VDC 到 32 VDC。

峰值电压：32 VDC。

ON电压水平：至少9.5 VDC。

OFF电压水平：最多3.5 VDC。

输入阻抗：6.9 K ohms（千欧姆）。

输入电流：在12 VDC时为1.7 mA，24 VDC时为3.5 mA。

最小ON电流：1.0 mA。

最大OFF电流：0.7 mA。

OFF到ON的响应时间：最大5毫秒。

ON到OFF的响应时间：最大5毫秒。

电源供电：5V时最大电流为215mA，24V时最大电流为0mA。

需要的端子块：需要使用欧式36端子的端子块。

此外，每个通道都有绿色LED状态指示灯，指示何时数字输入为ON状态。模块上还有一个绿色闪烁的状态LED，表示模块正在被扫描；琥珀色闪烁的状态LED表示通道被强制，红色状态LED表示模块诊断存在问题。控制器内的逻辑允许必要时可以反转状态。

The Honeywell 900G32-0101 is a 32-point digital input module. Here are some of the key features of the module:

Input type: Digital Input Module-DC Voltage type.

Input channels: 32 input channels, divided into two groups, each group of 16 channels.

Input voltage range: 10 VDC to 32 VDC.

Peak voltage: 32 VDC.

ON voltage level: at least 9.5 VDC.

OFF voltage level: up to 3.5 VDC.

Input impedance: 6.9K ohms (kilohm).

Input current: 1.7 mA at 12 VDC and 3.5 mA at 24 VDC.

Minimum ON current: 1.0mA.

Max OFF current: 0.7mA.

Response time from OFF to ON: Max. 5 ms.

Response time from ON to OFF: Max. 5 ms.

Power supply: the maximum current is 215mA at 5V and 0mA at 24V.

Terminal block required: Terminal block required to use the European 36 terminal.

In addition, each channel has a green LED status indicator indicating when the digital input is ON. There is also a green blinking status LED on the module, indicating that the module is being scanned; An amber blinking status LED indicates that the channel is forced, and a red status LED indicates that there is a problem with module diagnosis. The logic within the controller allows the state to be reversed if necessary.