Consilium NSAC-1 火灾报警系统面板是一款专业的火灾报警设备，具有多种功能和特点。以下是关于该产品的详细介绍：

基本信息

型号：NSAC-1

品牌：Consilium

产地：加拿大

功能：火灾报警系统面板

价格：约￥3256.00起（价格可能随市场波动及购买数量变化，请以实际购买时为准）

技术参数

结构形式：模块式

安装方式：控制室安装

输出频率：50Hz

工作电压：18.5至36Vdc

处理速度：50MHz

环境温度：0°C至60°C

环境湿度：5%至95%，非冷凝

重量：1.380kg

外形尺寸：22.4cm x 39.4cm x 27.9cm

功能特点

火灾报警：能够接收来自火灾探测器的信号，经过处理、运算和判断后，一旦确认火灾，立即启动报警装置，如声、光报警等。

联动控制：除了报警功能外，还能启动消防联动装置和连锁减灾系统，用以驱动各种灭火设备和减灾设备。

故障报警：具有故障报警功能，能够监视线路、探测器、远动控制模块、电源、蓄电池等设备，一旦发现故障，立即发出报警信号。

显示与记录：显示屏能够显示报警地址、数量等信息，并具有火灾报警记忆功能，保持并记忆报警信息。

多种保护：如集成过压保护（高达5kV）和开关位置指示等，确保设备的安全可靠。

应用场景

Consilium NSAC-1 火灾报警系统面板适用于各种需要火灾报警和消防联动的场所，如商业建筑、工业厂房、住宅小区等。它可以作为区域报警系统、集中报警系统或控制中心报警系统的核心部件，提供可靠的火灾报警和联动控制功能。

The Consilium NSAC-1 fire alarm system panel is a professional fire alarm device with multiple functions and features. The following is a detailed introduction about the product:

essential information

Model: NSAC-1

Brand: Consilium

Origin: Canada

Function: Fire alarm system panel

Price: Starting from approximately ¥ 3256.00 (price may vary with market fluctuations and purchase quantity, please refer to the actual purchase time)

technical parameter

Structural form: modular

Installation method: Control room installation

Output frequency: 50Hz

Working voltage: 18.5 to 36Vdc

Processing speed: 50MHz

Environmental temperature: 0 ° C to 60 ° C

Environmental humidity: 5% to 95%, non condensing

Weight: 1.380kg

Dimensions: 22.4cm x 39.4cm x 27.9cm

Functional Features

Fire alarm: It can receive signals from fire detectors, process, calculate and judge them, and once a fire is confirmed, immediately activate alarm devices such as sound and light alarms.

Linkage control: In addition to alarm function, it can also activate fire linkage devices and interlock disaster reduction systems to drive various fire extinguishing and disaster reduction equipment.

Fault alarm: It has a fault alarm function and can monitor equipment such as lines, detectors, remote control modules, power supplies, batteries, etc. Once a fault is detected, an alarm signal will be immediately issued.

Display and recording: The display screen can display alarm addresses, quantities, and other information, and has a fire alarm memory function to maintain and remember alarm information.

Multiple protections, such as integrated overvoltage protection (up to 5kV) and switch position indication, ensure the safety and reliability of the equipment.

Application scenarios

The Consilium NSAC-1 fire alarm system panel is suitable for various places that require fire alarm and fire linkage, such as commercial buildings, industrial plants, residential areas, etc. It can serve as a core component of regional alarm systems, centralized alarm systems, or control center alarm systems, providing reliable fire alarm and linkage control functions.