LSU-113DG DEIF控制模块是一款由DEIF（丹控）公司生产的控制设备，主要用于发电单元的原动机控制。以下是对该控制模块的详细解析：

一、基本信息

品牌：DEIF（丹控）

型号：LSU-113DG

类型：控制模块/负荷分配器

二、主要功能

负荷分配：LSU-113DG能够控制多个功率单元之间的负荷分配，确保各单元按预定比例承担负荷。

功率控制：在单机模式下执行频率控制，与电网并联运行时执行功率控制，与其他功率单元并联运行时执行频率和功率控制。

逆功率保护：具备逆功率保护功能，当检测到逆功率时，会自动切断相关电路，保护设备安全。

频率变送：内置频率变送器，能够测量并输出频率信号，便于系统监控和调整。

自检功能：模块具有自检功能，能够检测自身运行状态，并通过指示灯反馈给用户。

三、技术规格

尺寸：263337（单位可能为毫米，具体需根据实际产品确认）

重量：约26千克

功率：2700瓦（具体功率可能因应用场景不同而有所变化）

电压：支持多种电压等级，包括220V和440VAC等

频率：支持50/60HZ

测量范围：电流测量范围从0.3A到5.0A AC，电压测量范围从57.7V到450V AC

四、应用场景

LSU-113DG DEIF控制模块广泛应用于发电领域，特别是柴油或燃气发电机的控制系统中。它能够实现精确的负荷分配和功率控制，提高发电系统的稳定性和效率。

The LSU-113DG DEIF control module is a control device produced by DEIF (Dankon) company, which is mainly used for prime mover control of power generation units. The following is a detailed analysis of the control module:

1. Basic information

Brand: DEIF

Model: LSU-113DG

Type: Control module/Load distributor

Two, the main function

Load distribution: The LSU-113DG can control the load distribution among multiple power units to ensure that each unit carries the load in a predetermined proportion.

Power control: Perform frequency control in stand-alone mode, power control when running in parallel with the grid, and frequency and power control when running in parallel with other power units.

Reverse power protection: Provides the reverse power protection function. When the reverse power is detected, the circuit is automatically cut off to protect the device.

Frequency transmitter: Built-in frequency transmitter, can measure and output frequency signal, easy to monitor and adjust the system.

Self-check function: The module has a self-check function, which can detect its own running status and feed back to the user through the indicator light.

3. Technical specifications

Size: 263337 (unit may be mm, specific needs to be confirmed according to the actual product)

Weight: About 26 kg

Power: 2700 watts (the specific power may vary depending on the application scenario)

Voltage: Support a variety of voltage levels, including 220V and 440VAC

Frequency: 50/60 Hz

Measurement range: Current measurement range from 0.3A to 5.0A AC, voltage measurement range from 57.7V to 450V AC

Iv. Application scenarios

The LSU-113DG DEIF control module is widely used in the field of power generation, especially in the control system of diesel or gas generators. It can achieve accurate load distribution and power control, improve the stability and efficiency of the power generation system.