WOODWARD 5464-414是一种数字速度传感器，用于测量和控制发电机的转速。这种传感器与发电机的轴直接耦合，可以实时监测发电机的转速，并将转速信号转换为数字信号输出。

WOODWARD 5464-414数字速度传感器具有多种功能，如热启动和冷启动的自动启动顺序、具有温度输入选项等。它还可以配置Modbus通信端口，以便与上位机或监控系统进行通信和数据传输。

使用WOODWARD 5464-414数字速度传感器可以实现对发电机转速的精确控制和监测，保障发电机的稳定性和可靠性。同时，它还可以与其他的控制模块和设备配合使用，实现对整个发电机组的控制和监测。

总之，WOODWARD 5464-414数字速度传感器是一种用于测量和控制发电机的转速的重要设备，可以实现对发电机转速的精确控制和监测，保障发电机的稳定性和可靠性。

在冷启动和热启动时，自动启动顺序的工作方式略有不同。

1. 冷启动：在冷启动时，需要首先检查电源是否接好，然后打开显示器、打印机、扫描仪等外部设备，并按下主机箱面板上的电源开关，接通主机电源。系统会自动进行内存测试，然后启动硬盘驱动器，进入操作系统。
2. 热启动：在热启动时，一般可避免反复开关主机而影响机器工作寿命，因此可采用复位启动方式。具体方法如下：首先用两手指按住“Ctrl”与“Alt”键不松开，再按下“Del”键，然后同时抬起三个手指，机器便重新启动。如果用户正在Windows系统中操作，则按下“Ctrl+Alt+Del”组合键后，系统会给出提示，询问是否确实要重新启动计算机。如果确定，可再次按下“Ctrl+Alt+Del”键。

以上信息仅供参考，如果还有疑问，建议咨询专业技术人员。

WOODWARD 5644-414 is a digital speed sensor used to measure and control the speed of a generator. The sensor is directly coupled with the shaft of the generator, which can monitor the speed of the generator in real time and convert the speed signal into a digital signal output.

The WOODWARD 5644-414 digital speed sensor has a variety of features, such as automatic start sequence for hot and cold starts, temperature input options, and more. It can also be configured with a Modbus communication port for communication and data transmission with an upper computer or monitoring system.

Using the WOODWARD 5644-414 digital speed sensor, the generator speed can be accurately controlled and monitored to ensure the stability and reliability of the generator. At the same time, it can also be used with other control modules and equipment to achieve the control and monitoring of the entire generator set.

In short, WOODWARD 5644-414 digital speed sensor is an important equipment used to measure and control the speed of the generator, which can achieve accurate control and monitoring of the speed of the generator to ensure the stability and reliability of the generator.

On cold starts and hot starts, the automatic start sequence works slightly differently.

Cold start: During the cold start, check whether the power supply is properly connected, turn on external devices such as monitors, printers, and scanners, and press the power switch on the panel of the main box to power on the host. The system will automatically perform a memory test, then boot the hard drive and enter the operating system.

Hot start: During hot start, it is generally possible to avoid repeatedly switching on and off the host and affecting the working life of the machine, so the reset start mode can be used. The specific method is as follows: First hold down the "Ctrl" and "Alt" keys with two fingers, then press the "Del" key, and then lift three fingers at the same time to restart the machine. If the user is operating in the Windows system, after pressing the Ctrl+Alt+Del key combination, the system will prompt you to ask if you really want to restart the computer. If yes, press Ctrl+Alt+Del again.

The above information is for reference only, if there are questions, it is recommended to consult professional and technical personnel.

公司主营产品，优势供应，充足库存:

各品牌DCS.PLC备件:

(本特利):3500系统/3300系统，前置器探头等

德国EPRO MMS6000系统卡件MMS3000系统卡件PR6422 PR6423 PR6424 PR6426

PR9268等系列探头前置器备件.

ABB PLC系统模块DCS系统卡件，包括一些停产的控制系统模块卡性。

GE燃机卡件IS200系列，DS200系列

Rockwell Allen-Bradley:SLC500/1747/1746、MIcroLogIx/1761/1763/1762/1766/1764、

CompactLogIx/1769/1768.

LogIx5000/1756/1789/1794/1760/1788、PLC-5/1771/1785等。

Invensys Foxboro(福克斯波罗）∶I/A SerIes系统，FBM(现场输入/输出模块〕顺序控制、梯形逻辑拉制、事故迫忆处理、数模转换、

输入/输出信号处理、数据道信及处理等。

lnvensys TrIconex:元余容错控制系统、基于三重模件冗余(TMR〉结构的**现代化的容错控制器。

westInghouse(西屋):OVATION系统.WDPF系统.WEStatIon系统备件.

SchneIder ModIcon(施耐德莫迪康):Quantum 140系列处理器、控制卡．电源模块等。

ABB:工业机器人备件DSQC系列、BaIley lNFI 90等。

Motorola(摩托罗拉):MVME5500、MVME6100、MVME 162、MVME 167、MVME1772、MVME177等系列。

XYCOM:I/O、VME板和处理器等。

GE FANUC(GE发那科):模块、卡件、驱动器等各类备件,IC693,IC695，IC697 IC698等系列。

Yaskawa(安川:伺吸控制器、伺服马达、问吸驱动器。

Bosch Rexroth(博世力士乐):Indramat，l/O模块,.PLC控制器,驱动模块等。

Woodward(伍德沃德):SPC阀位控制器、PEAK150数字控制器。

Rosemount罗斯豢特:压力变送器、流量计。