介绍：

YOKOGAWA AAI141-H50/K4A00 模拟量输入模块

■总则本GS描述了FIO和fleld设备的I/O模块之间的连接。

■信号连接

信号连接的变化10个模块可以通过端子连接

或通过KS电绕与接线极连接到现场设备接适配器。

客户发短的ML电缆也可用于连按输入/输出模块。

以下说明了可以与/0模块配对的接线板以及信号接线。

/0模块连接的配置提供了一个压力夹接线板，

用于与现场设备的揣子连接。

通过扩展终端端子板，将XS电缆适配器连接到I/O模块。

使用客户提供的故障指示灯连接器时电缆

可以直接连接到

I/O模块。为双冗余配置提供了专用接线板。

●使用的电缆

600V聚氯乙烯绝缘电线(四)﹔

吉士C3307

电气设备用聚氯乙烯绝缘电线(KIV) ;

吉士C331660OV级耐热聚氯乙烯绝缘电线(HIV) ;

吉士C3317耐热乙烯基绝缘电线vW-1 (UL1015/UL1007)

控制电缆(乙烯基绝缘乙烯基护套电缆)(cw) ;

吉士C3401●建议的电缆厚度压力夹端子

无套管:0.5至2 mm2 (AWG20至14)带套管:

0.5至1.5 mm2 (AWG20至16)M4压接端子:

0.5至2 mm2 (AWG20至14)

Description:

YOKOGAWA AAI141-H50/K4A00 Analog input module

This GS describes the connection between the I/O modules of the FIO and fleld devices.

■ Signal connection

Signal connection changes 10 modules can be connected via terminals

Or connect to the field device adapter through KS electrical winding and wiring pole.

Customer-issued short ML cables can also be used to connect input/output modules.

The following describes the patch boards and signal wiring that can be paired with the /0 module.

The /0 module connection configuration provides a pressure clamp patch panel,

Connector for connection to field equipment.

Connect the XS cable adapter to the I/O module by extending the terminal terminal board.

Cable when using customer supplied fault indicator connector

Can be connected directly to

I/O module. Dedicated patch boards are provided for dual redundancy configuration.

● Cables used

600V PVC insulated wire (4);

Geez C3307

Polyvinyl chloride insulated wire (KIV) for electrical equipment;

Jishi C331660OV Heat resistant PVC insulated wire (HIV);

Geez C3317 Heat resistant vinyl insulated wire vW-1 (UL1015/UL1007)

Control cable (vinyl insulated vinyl sheathed cable)(cw);

Geez C3401● Recommended cable thickness pressure clamp terminals

No casing :0.5 to 2 mm2 (AWG20 to 14) With casing:

0.5 to 1.5 mm2 (AWG20 to 16)M4 crimp terminals:

0.5 to 2 mm2 (AWG20 to 14)